Multi-functional, with intelligent power management
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge
technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions,
the MultiPlus has several advanced features, as outlined below.
Two AC Outputs
The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the
event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than
20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the MultiPlus.
System configuring has never been easier
After installation, the MultiPlus is ready to go.
If settings have to be changed, this can be done in a matter of minutes with a new DIP switch setting procedure.
Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed!
Alternatively, VE.Net can be used instead of the DIP switches.
Victron Multiplus * 24/3000/70-50A | |
PowerControl | Yes |
PowerAssist | Yes |
Transfer switch (A) | 16 or 50 |
Parallel and 3-phase operation | Yes |
Input voltage range (V DC) | 9,5 – 17 V 19 – 33 V 38 – 66 V |
Output |
Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% |
Cont. output power at 25 °C | 3000 |
Maximum efficiency (%) | 93 / 94 / 95 |
AC Input | 187V - 265V |
Battery temperature sensor | Yes |
Remote on-off | Yes |
Common Characteristics | Material & Colour: aluminium (blue RAL 5012) |
Battery-connection | Four M8 bolts (2 plus and 2 minus connections) |
Weight (kg) | 10 |
Dimensions (hxwxd in mm) | 362x258x218 |