Products (2)

Victron Quattro ** 48/5000/70-100+50A

Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.

 

Two AC Outputs
The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

 

Unique PowerAssist feature
The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

 

Virtually unlimited power thanks to parallel operation
Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

 

Victron Quattro ** 48/5000/70-100+50A
Integrated Transfer switch Yes
PowerAssist Yes
AC inputs (2x) Input voltage range: 90-140 VAC
Input frequency: 45 – 65 Hz
Input voltage range (V DC) 37,2 – 64,4
Output Output voltage: 230 VAC ± 2%
Frequency: 50 Hz ± 0,1%
Cont. output power at 25 °C 5000
Charge voltage 'absorption' (V DC) 57.6
Auxiliary output (A) 50
Battery temperature sensor Yes
Remote on-off Yes
Common Characteristics Material & Colour: aluminium (blue RAL 5012)
230 V AC-connection M6 bolts
Weight (kg) 45
Dimensions (hxwxd in mm) 470 x 350 x 280
captcha
Reload